Industrial and Commercial Fans

ROOF-AM

ROOF-AM The fans of the ROOF-AM series are designed to extract large volumes of air in roof installations, without long ducts. For instance: ventilation of industrial buildings (factories, warehouses etc.) of stock farms and electrical equipment etc. The series is composed by 7 sizes with impeller from 500 up to 1000 mm 

PLATE-M

PLATE-M The fans of the PLATE-M series are designed for installations requiring large capacities with low pressures. The series is constituted by 9 sizes with impeller diameter from 250 up to 700 mm

PLATE -S

PLATE-S The fans of the PLATE-S series are ideal when are requiring large capacities with low pressures, in applications for wall or panel fixing. The series is constituted by 8 sizes with impeller diameter from 300 up to 700 mm

DUCT – M

DUCT-M The fans of the DUCT- M series, are suitable when large air volumes are required with relatively low pressures, in duct mounted applications. The series is constituted by 13 sizes with impeller diameter from 310 up to 1250 mm

DUCT-S

DUCT-S The fans of the DUCT-S series are designed for large air capacities with low pressure, in applications duct mounted. The series is constituted by 8 sizes with impeller diameter from 300 up to 700 mm

DUCT-BD

DUCT-BD DUCT-BD series has been designed for all the applications where it is necessary to keep the motor outside the airflow, because of smoke, dusts and humidity. The maximum admitted temperature of the conveyed air is 60°C in continuous service. Performances correspond to the DUCT-M series with a reduction of 5% in capacity. The series is constituted by 7 sizes with impeller diameter from 500 up to 1000 mm

FAN IN PLASTIC MATERIAL

CORROSION PROOF CENTRIFUGAL FANS These single inlet centrifugal fans with backward curved blade impellers, thanks to their construction completely made in plastic material are used in chemical or galvanic industries or whenever there is the necessity to exhaust corrosive The series is constituted by 10 sizes with impeller diameter from 200 to 630 mm

PLATE-M ATEX

PLATE-M ATEX The PLATE-M ATEX series is designed where it is necessary to grant a correct air extraction avoiding risks of injection due to the presence of flammable gases. For instance they are employed in the ventilation of battery rooms, petro-chemical platforms, laboratories etc., for wall or panel mounting. The series is constituted by 9 sizes with impeller diameter from 250 up to 700 mm.

DUCT-M HT

DUCT-M ht DUCT-M HT line is characterized by the use of special components (motor, impeller and casing), different from the standard production, suitable to guarantee the heavy and essential service for which they are designed to withstand to the high temperatures to guarantee the possibility of salvation for the people involved in a fire

JP-DUCT

JP-DUCT Impulse fans JP-DUCT are used in the forced ventilation of car parks, to remove the most common pollutions (ex. CO) and in case of emergency (fire), it activates to prevent and restrict the damages to people and objects: creating escape routes from toxic smokes, preventing the propagation in the adjacent zones etc.

BOX BD

MANUFACTURING FEATURES 

  • Impellers made of polyamide reinforced with fiberglass 
  • BD range fans assembled in soundproof cabinets with thermo-acoustic elastomer insulation, M1 fire resistance.
  • Fan assembled on anti-vibration mountings.
  • Connection gland included.
  • Closed motors specially designed by Casals with extruded aluminium housing, which make the whole connection is protected within the integrated terminal box on the motor with IP-65 protection. Motor with IP-54 protection and Class F insulation standard voltages: 230V 50Hz in single phase and 230/400 V three-phase motors.

APPLICATIONS :

Designed for inline installation, indoor or outdoor assembly, they are suitable for:

  • Air renewal in buildings and industries.
  • Industrial and professional kitchen hoods.
  • Maximum working temperature: 50ºC.

UNDER REQUEST:

  • 3 speed fans.
  • LG0 position.
  • Impellers made of galvanised steel sheet.
     
BOX BV

BELT DRIVEN CENTRIFUGAL IN SOUNDPROOF CABINET

MANUFACTURING FEATURES:

  • Impellers made of polyamide reinforced with fiberglass up to size 12/12 (33/33). The rest of models are made of galvanized steel sheet.
  • BV, BVC, BVCR range fans assembles in soundproof cabinets with thermo-acoustic elastomer insulation, M1 fire resistance.
  • Fan assembled on ant vibration mountings.
  • Supplied with motor, pulleys and belts.
  •  Connection gland included.
  • Squirrel cage asynchronous standard motor, IP-55 protection and rated class F insulation. Standard voltages 230/400V 50Hz for three phase motors up to 4kW and 400/690V 50Hz for higher powers.

APPLICATIONS:

Designed for inline installation, indoor or outdoor assembly, they are suitable for:

  • Air renewal in buildings and industries.
  • Industrial and professional kitchen hoods.
  • Maximum working temperature: 60ºC.

UNDER REQUEST:

  • 60Hz fans and special voltages.
  • 2 SPEED MOTORS.
  • Impellers made of galvanised steel sheet.
  • LG0 position.
BOX BD PLUS

CENTRIFUGAL FAN IN SOUNDPROOF BOX WITH SANDWICH PANELS

MANUFACTURING FEATURES

  • Impellers made of polyamide reinforced with fibreglass.
  • BD range fans assembled in soundproof cabinets.
  • Structure profile made of aluminium 30 mm.
  • Casing made of galvanized sandwich panel, with inner rock wool A1 class (100% noncombustible), density 90Kg/m3.
  • Connection gland included.
  • Easy access through lateral panel.
  • Fan can be placed in any position by exchanging panels.
  • Closed motors specially designed by Casals. Extruded aluminium motor housing. Totally enclosed wiring box IP-65. IP-54 motor protection and rated class F insulation. Standard voltages 230V 50Hz for single phase and 230/400V 50Hz for three phase motors.

APPLICATIONS

Designed for inline installation, indoor or outdoor assembly, they are suitable for:

  • Air renewal in buildings and industries.
  • Maximum working temperature: 50ºC.

UNDER REQUEST

  • 3 speed fans.
  • Impeller made of galvanized sheet
BOX BV PLUS

BELT DRIVEN CENTRIFUGAL IN SOUNDPROOF CABINET WITH SANDWICH PANELS

MANUFACTURING FEATURES

  • Impellers made of polyamide reinforced with fi¬breglass up to size 12/12 (33/33). Other models are made of galvanised steel sheet.
  • BV, BVC, BVCR range fans assembled in sound¬proof cabinets.
  • Casing made of galvanized sandwich panel, with inner rock wool A1 class (100% non-combustible), density 90Kg/m3.
  • Fan assembled on ant vibration mountings.
  • Supplied with motor, pulleys and belts.
  • Connection gland included.
  • Squirrel cage asynchronous standard motor, IP-55 protection and rated class F insulation. Stand¬ard voltages 230/400V 50Hz for three phase, mo¬tors up to 4kW and 400/690V 50Hz for higher powers.

APPLICATIONS

Designed for inline installation, indoor or outdoor assembly, they are suitable for:

  • Air renewal in buildings and industries.
  • Industrial and professional kitchen hood.
  • Maximum working temperature: 60ºC.

UNDER REQUEST

  • 2 speed motors.
  • LG0 position.
  • Impeller made of galvanized sheet.
TWIN BOX BD

CENTRIFUGAL IN SOUNDPROOF CABINET

MANUFACTURING FEATURES

  • Impellers made of reinforced polyamide with fiber glass up to size 12/12 (33/33). Size 15/15 made of galvanized steel sheet.
  • BD range fans assembled in soundproof cabinets with thermo-acoustic elastomer insulation, M1 fire resistance.
  • Fan assembled on anti vibration mountings.
  • Connection gland included.
  •  Equipped with inlet deflector wing, minimizing the turbulence and optimizing efficiency.
  • Closed motors specially designed by Casals. Ex¬truded aluminium motor housing. Totally enclosed wiring box IP-65. IP-54 motor protection and rated class F insulation. Standard voltages 230V 50 Hz for single phase and 230/400V 50Hz.
  • Fans can run separately or simultaneously.

APPLICATIONS

Designed for inline installation, indoor or outdoor assembly, they are suitable for:

  • Air renewal in buildings and industries.
  • Industrial and professional kitchen hood.
  • Maximum working temperature: 50ºC.

UNDER REQUEST

  • 3 speed fans.
  • LG0 position.  
  • Impeller made of galvanized sheet.
  • Aluminium box up to size 12/12.

 

 

TWIN BOX BV

BELT DRIVEN CENTRIFUGAL IN SOUNDPROOF CABINET

MANUFACTURING FEATURES

  • Impellers made of polyamide reinforced with fi¬breglass up to size 12/12   (33/33). Other models are made of galvanised steel sheet.
  • BV, BVC, BVCR range fans assembled in sound¬proof cabinets with thermo-acoustic elastomer insulation, M1 fire resistance.
  • Fan assembled on anti vibration mountings.
  • Supplied with motor, pulleys and belts.
  • Connection gland included.
  • Squirrel cage asynchronous standard motor, IP-55 protection and rated class F insulation. Standard voltages 230/400V 50Hz for three phase, motors up to 4kW and 400/690V 50Hz for higher powers.
  • Fans can run separately or simultaneously.

APPLICATIONS

Designed for inline installation, indoor or outdoor assembly, they are suitable for:

  • Air renewal in buildings and industries.
  • Industrial and professional kitchen hood.
  • Maximum working temperature: 60ºC.

UNDER REQUEST

  • 2 speed motors.
  • LG0 position.  
  • Impeller made of galvanized sheet.
  • Aluminium box up to size 12/12.
BOX BSTB

BOX FAN WITH BACKWARD IMPELLER AND BELT TRASMISSION - F400-120 

MANUFACTURING FEATURES:

  • BSTB range fans assembled in soundproof cabinets with insulated panels.
  • Fan assembled on anti vibration mountings.
  •  Simple inlet backward curved impeller.
  • Supplied with motor, pulleys and belts.
  • Interchangeable panels to allow different fan positions.
  • Gland connection included.
  • Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230/400V 50Hz in three phase motors up to 4kW and 400/690V 50Hz for higher powers.

APPLICATIONS:

Designed for inline installation, indoor or outdoor assembly, they are suitable for:

  • Smoke emergency exhaust with motor outside the hazardous area.
  • Industrial and professional kitchen hoods.
  • Maximum working temperature: carried air: 130ºC, ambient: 60ºC.

UNDER REQUEST:

  • 2 speed motors.
  • Orientation:
  • LG90 (horizontal).
  • LG0 (vertical outlet).
  • Sandwich insulation.
  • 60Hz fans and special voltages.

Official homologation by the European laboratory APPLUS according to EN 12101-3:2002, EN 12101-3:2002/AC:2005
Certification Nr: 0370-CPR-1371
 

BOX HB

AXIAL IN SOUNDPROOF CABINET

MANUFACTURING FEATURES:

  •  BOX: Soundproof galvanised steel box with thermo-acoustic elastomer insulation, M1 fire resistance. Easy motor access and fan maintenance through removable panels.
    Inside fan:
  • HB: Axial fan, circular reinforced frame from size 45 to 80. For larger sizes uses from 90 to 125 we use model HC.
    Motor-impeller assembly through a modular system. Variable pitch angle polyamide impeller reinforced with fibreglass. Epoxy powder finishing coat.
  •  HBA: Axial fan with the same construction features than HB but with aluminium impeller from size 45 to 80. For larger sizes uses from 90 to 125 is HCA. Motor-impeller assembly through a modular system.
  • Squirrel cage asynchronous standard motor, IP-55 protection and rated class F insulation. Standard voltages 230V 50Hz for single phase motors, 230/400V 50Hz for three phase motors up to 4kW and 400/690V 50Hz for higher powers.

APPLICATIONS:

Designed for wall or duct installation, they are suitable for:

  • Air renewal in buildings and industries.
  • Smoke extraction (max 45-50ºC).
  •  Maximum working temperature: 1ph 50ºC, 3ph 60ºC.

AVAILABLE ON REQUEST:

  • Reversible impeller.
  • B form impeller(airflow from impeller to motor)
  • 60Hz fans and special voltages.
CHELYS

MIXFLOW, POLYPROPYLENE CASING AND IMPELLER

MANUFACTURING FEATURES:

  • In-line mixed-flow fan in plastic casing.
  • Casing made of high quality durable ABS plastic (Chelys 100-200) or fire resistant polypropylene (Chelys 250-315). Model 125S is provided with a stronger motor.
  • Motor with impeller and terminal box fixed on the casing by means of special clamps with latches, designed to be easily dismounted without tools.
  • Single phase motor, 2 speeds, with ball bearings. Standard voltages 230V 50Hz and 60 Hz. IPX4 protection.
  • The Chelys range is designed to allow the installation or dismantling of the fans without any duct manipulation.

APPLICATIONS

Designed for inline installation, they are suitable for:

  • Air renewal in bathrooms and small closed environments.
  •  Maximum working temperature: 50 ºC.

AVAILABLE ON REQUEST:

  • Timer
  • Special 60Hz versions under request
BT2

CENTRIFUFAL IN LINE FAN WITH EXTERNAL ROTOR MOTOR

MANUFACTURING FEATURES

  • Coated sheet housing.
  • Impeller made of galvanized sheet (model sizes 160 to 315) or plastic ABS (model sizes 100 to 150).
  • External wiring box.
  • Asynchronous external rotor, with thermal protector and ball bearing permanently greased included. IP-44 protection and class F insulation according to DIN 40.050 h1. Standard voltage 230V 50Hz.

APPLICATIONS

Designed for inline installation, they are suitable for:

  • Air renewal in bathrooms and small closed environments.
  • Maximum working temperature in continuous:50ºC.
  • Not suitable for explosive gases transport.

UNDER REQUEST

  • 60Hz fans
HJEM

SQUARE WALL PLATE FAN

MANUFACTURING FEATURES

  • Square plate made of galvanized steel sheet.
  • Aluminium sheet impeller.
  • Supplied with motor support and protection guard according to the UNE-EN 294 standard.
  • Shaded-pole asynchronous motor with Electromagnetic Compatibility Certification (EMC) according to the EN 55014, EN 61000-3-2 (95) and EN 61000-3-3 (95) Standards; rated Class F isolation and IP-44 protection according to the DIN40050 standard.

APPLICATIONS

Designed for wall assembly, they are suitable for:

  • Air renewal in all kind of closed environments.
  • Maximum working temperature: 50ºC.
     
HJBM

SQUARE WALL PLATE FAN, VARIABLE PITCH BLADES

MANUFACTURING FEATURES

  • Square plate made of galvanized steel sheet.
  • Variable pitch angle polyamide impeller reinforced with fibreglass.
  • Supplied with motor support and protection guard according to the ROHS 2002/95/EC Directive (Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipments).
  • Standard asynchronous squirrel-cage motor with IP-55 protection (wiring box IP-65)  and Class F insulation. Manufactured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase motors.

APPLICATIONS

Designed for wall assembly, they are suitable for:

  • Air renewal in buildings and industries.
  • Maximum working temperature: single phase 50ºC, three phase 60ºC.

UNDER REQUEST

  • B form impeller (air flow from impeller to motor).
  • 100% reversible impeller.
  • Aluminium impeller.
  • 60Hz fans and special voltages.
     
HJBM PLUS

SQUARE WALL PLATE FAN, VARIABLE PITCH BLADES AND HIGH EFFICIENCY MOTOR

MANUFACTURING FEATURES

  • Square plate made of galvanized steel sheet with epoxy painting.
  • Variable pitch angle polyamide impeller reinforced with fibreglass.
  • Supplied with motor support and protection guard according to the UNE-EN 20-359-74 norm and the ROHS 2002/95/EC Directive (Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment).
  • High efficiency standard asynchronous squirrel-cage motor with IP-55 protection (wiring box IP-65) and Class F insulation. Manufactured with standard voltages: 230V 50Hz for the single phase motors and 230/400V 50Hz for the three phase motors.

APPLICATIONS

Designed for wall assembly, they are suitable for:

  • Air renewal in buildings and industries.
  • Maximum working temperature: single phase 50ºC, three phase 60ºC.
     

UNDER REQUEST

  • Aluminium impeller.
  • 60Hz fans.
HJBM EEC

WALL MOUNTED FAN WITH SQUARE FRAME, VARIABLE PITCH BLADES AND ELECTRONIC MOTOR

MANUFACTURING FEATURES

  • Square plate made of galvanized steel sheet.
  • Variable pitch angle polyamide impeller reinforced with fibreglass.
  • Supplied with motor support and protection guard according to the
  • ROHS 2002/95/EC Directive (Restriction of the Use of Certain
  • Hazardous Substances in Electrical and Electronic Equipments).
  • High efficiency brushless motor with permanent magnets and low sound level. Specially designed for fans with operating and control electronics on motor back.
  • Switching frequency of 16 KHz.
  • Operating range: 300 - 1800 rpm.
  • Power supply: 230V + - 10%.
  • Power Frequency: 50/60Hz.
  • Operating temperature range: -20ºC +45ºC.
  • Enclosed motor IP 54.
  • Insulation class H.
  • Speed control through:
  • 22Kohms Trimmer.
  • 0-10V external sensor.


APPLICATIONS

Designed for wall assembly, they are suitable for:

  • Air renewal for all kind of buildings and industries.

UNDER REQUEST

  • B form impeller (air flow from impeller to motor).
  • Aluminium  impeller.

 

HJB

BELT DRIVE AXIAL FAN FOR HUGE AIR FLOW  

MANUFACTURING FEATURES:

  • Completely made of galvanized steel sheet.
  • Equipped with gravity shutter.
  • Stainless steel impeller (AISI 304).
  • Protection grid on pulley area.
  • Standard asynchronous squirrel-cage motor with IP-55 protection and class F insulation. Manufactured with standard voltage: 230/400V 50Hz IE2
  • Internal wiring box. Inspection door for motor access.
     

APPLICATIONS:

Designed for wall assembly, they are suitable for:

  • Air renewal in buildings and industries.
  • Farms and greenhouses.
  • Maximum working temperature: 50ºC.
     
HB / HBA

WALL FAN , VARIABLE PITCH BLADES  

MANUFACTURING FEATURES:

  • Plate axial fan with circular reinforced frame.
  • Motor-impeller modular assembly for complete versatility.
  • Corrosion-resistant powder coat epoxy resin..
  • Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase, motors up to 4kW and 400/690V 50Hz for higher powers.
  • HB: Polyamide impeller with variable pitch angle reinforced with fiberglass
  • HBA: Cast aluminum impeller with variable pitch angle.

APPLICATIONS:

Designed for wall or duct installation, they are suitable for:

  • Air renewal in buildings and industries.
  • Maximum working temperature: 1ph 50ºC, 3ph 60ºC.

UNDER REQUEST:

  • Supply impeller (air direction from impeller to motor)
  • 100% reversible impeller.
  • 60Hz fans and special voltages.
  • Hot-dipped galvanized or stainless steel housing
     
HC

SHORT CASED VARIABLE PITCH BLADES FAN

MANUFACTURING FEATURES

  • Plate axial fan with circular reinforced frame.
  • Motor-impeller modular assembly for complete versatility.
  • Epoxy powder finishing coat.
  • Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase motors up to 4kW and 400/690V 50Hz for higher powers.
  • HC: Polyamide impeller with variable pitch angle reinforced with fiberglass
  • HCA: Cast aluminum impeller with variable pitch angle.

APPLICATIONS::

Designed for wall or duct installation, they are suitable for:

  • Air renewal in buildings and industries.
  • Smoke exhaust (maximum 50-60ºC).
  • Maximum working temperature: 50ºC single phase, 60ºC three phase.

UNDER REQUEST:

  • Supply impeller (air direction from impeller to motor), 100% reversible impeller.
  • 60Hz fans and special voltages.
  • Hot-dipped galvanized or stainless steel housing.
  • Optional can be adapted an square plate to the frame, to transform it in an axial square frame version fan.
HM

LONG CASED VARIABLE PITCHBLADES

MANUFACTURING FEATURES

  • Reinforced fan casing manufactured in rolling steel sheet.
  • Motor-impeller modular assembly for complete versatility.
  • Epoxy powder finishing coat.
  • Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase motors up to 4kW and 400/690V 50Hz for higher powers.
  • HM: Polyamide impeller with variable pitch angle reinforced with fibreglass
  • HMA: Cast aluminium impeller with variable pitch angle.

APPLICATIONS::

Designed for inline installation, they are suitable for:

  • Air renewal in buildings and industries.
  • Smoke extraction (max 50-60ºC).
  • Maximum working temperature: 1ph 50ºC, 3ph 60ºC.

UNDER REQUEST:

  • 100% reversible impeller.
  • 60Hz fans and special voltages.
  • Hot-dipped galvanised or stainless steel housing.
HH

EXTERNAL MOTOR, VARIABLE PITCH BLADES

MANUFACTURING FEATURES:

Designed for inline installation, they are suitable for:

  • Long cased fan.
  • Transmission ball bearings set inside a sealed box manufactured in steel or cast aluminium. Ball bearings permanently greased.
  • Cast aluminium impeller with variable pitch angle in origin.
  • Epoxy powder finishing coat.
  • Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase motors, up to 4kW and 400/690V 50Hz for higher powers.
  • Inspection door located on the lower part of the housing.

APPLICATIONS:

Designed for inline installation, they are suitable for:

  • Air renewal in buildings and industries.
  • Extraction of hot air up to 110ºC.
  • Maximum working temperature: carried air: 110ºC, ambient 60ºC.

UNDER REQUEST:

  • Supply impeller (air direction from impeller to motor
  • Reversible impeller.
  • Polyamide impeller.
  • 60Hz fans and special voltages.
  • 2 speed motors.
  • Hot-dipped galvanised or stainless steel housing.
HHP

EXTERNAL MOTOR, SPLIT CASING FOR MAINTENANCE, VARIABLE PITCH BLADES

MANUFACTURING FEATURES:

  • Long cased fan.
  • Transmission ball bearings set inside a sealed box manufactured in steel or cast aluminium. Ball bearings permanently greased.
  • Cast aluminium impeller with variable pitch angle in origin.
  • Epoxy powder finishing coat.
  • Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase motors, up to 4kW and 400/690V 50Hz for higher powers.
  • Fan opening option (180º) for easier maintenance and no need of disassembly from the installation.

APPLICATIONS:

Designed for inline installation, they are suitable for:

  • Air renewal in buildings and industries.
  • Extraction of hot air up to 110ºC.
  • Maximum working temperature: carried air: 110ºC, ambient

UNDER REQUEST:

  • Supply impeller (air direction from impeller to motor),
  • Reversible impeller.
  • Polyamide impeller.
  • 60Hz fans and special voltages
  • 2 speed motors.
  • Stainless steel housing.
     

 

MB

MEDIUM PRESSURE CENTRIFUGAL FAN WITH FORWARD IMPELLER

MANUFACTURING FEATURES:

  • Rolling steel sheet housing.
  • Completely joined or welded housing.
  • Galvanised steel sheet simple inlet forward curved impeller.
  • Epoxy powder finishing coat.
  • Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230V  50Hz in single phase motors and 230/400V 50Hz  in three phase motors.
  • Standard position: LG 270.

APPLICATIONS:

Designed for inline installation, they are suitable for:

  • Industrial applications, extraction or injection of air.
  • Cooling of machines and parts.
  • Clean air transport.
  • Maximum working temperature: carried air: 130ºC, ambient: 1ph 50ºC, 3ph 60ºC.
     

UNDER REQUEST:

  • 60Hz and special voltages.
  • 2 speed motors.
  • Fan for air working temperatures up to 250ºC.
  • Fans provided with cooling disk for high temperature.Position: LG 0, LG 45, LG 90, LG 135, LG 180, LG 225, LG 315, RD 0, RD 45, RD 90, RD 135, RD 180, RD 225, RD 270, RD 315
MBCA

MEDIUM PRESSURE FAN WITH FORWARD IMPELLER

MANUFACTURING FEATURES:

  • Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average film thickness of 70 microns. Average heat resistence of coating is 180ºC with peaks of 200ºC.
  • Fully welded housing.
  • High efficiency simple inlet forward curved impeller made of Fe360 sheet statically and dynamically balanced.
    Impellers are painted with epoxy primer that resists temperatures up to 300ºC.
  • Standard asynchronous squirrel-cage motor with IP-55 protection and class F insulation. Manufactured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz   in three phase motors up to 4kW and 400/690V 50Hz for higher powers.
  • Standard orientation LG270.
  • It allows adjusting the orientation locally from models 180 to 630. Models sizes from 710 to 1000 size the orientation is fixed.
     

APPLICATIONS:

Designed for inline installation, they are suitable for:

  • Industrial applications, extraction or injection of air.
  • Cooling of machines and parts.
  • Clean air transport.
  • Maximum working temperature: carried air: 130ºC, ambient: 60ºC.
     

UNDER REQUEST:

  • 60Hz fans and special voltages.
  • 2 speed motors.
  • Spark-proof fans with ATEX certified motor.
  • Fan for air working temperatures up to 250ºC with R/R (cooling impeller).
  • Hot dip galvanised or stainless steel fans.
  • Orientation: RD0, RD45, RD90, RD135, RD180, RD225, RD270, RD315, LG0, LG45, LG90, LG135, LG180, LG225, LG315
     
MBP

MEDIUM PRESSURE WITH BACKWARD IMPELLER AND PLASTIC CONSTRUCTION

MANUFACTURING FEATURES:

  • PE plastic housing.
  • Backward curved impeller in PP plastic.
  • Motor support made of rolled steel sheet with epoxy powder finishing coat.
  • Stainless steel nuts and bolts.
  • Standard asynchronous squirrel-cage motor, IP-55, class F insulation. Standard voltages 230/400V 50Hz.
  • Standard orientation: LG270.

APPLICATIONS:

Designed for inline installation, they are suitable for:

  • Corrosive air transport.
  • Chemical and petrochemical industry.
  • Laboratories and gas cabinets.
  • Maximum working temperature: 50ºC.

UNDER REQUEST:

  • Single phase motors (up to 1,5Kw).
  • 60Hz fans and special voltages fans.
  • 2 speed motors.
  • Stainless steel motor support.
  • Casing made of PP.
  • Orientation: RD0, RD45, RD90, RD135, RD180, RD225, RD270, RD315, LG0, LG45, LG90, LG135, LG180. LG225, LG315.
MBPC

MEDIUM PRESSURE FAN WITH FORWARD IMPELLER AND IN PLASTIC CONSTRUCTION

MANUFACTURING FEATURES:

  •  PE plastic housing (antistatic PE-el for ATEX units).
  • Forward curved impeller in PP plastic.
  • Motor support made of rolled steel sheet with epoxy powder finishing coat.
  • Stainless steel nuts and bolts.
  • Standard asynchronous squirrel-cage motor, IP-55, class F insulation. Standard voltages 230/400V 50Hz.
  • Standard orientation: LG270.

APPLICATIONS:

Designed for inline installation, they are suitable for:

  • Corrosive air transport.
  • Chemical and petrochemical industry.
  • Laboratories and gas cabinets.
  • Maximum working temperature: 50ºC.

UNDER REQUEST:

  • Single phase motors (up to 1,5kW).
  • 60Hz fans and special voltages fans.
  • 2 speed motors.
  • Stainless steel motor support.
  • Orientation: RD0, RD45, RD90, RD135, RD180, RD225, RD270, RD315, LG0, LG45, LG90, LG135, LG180. LG225, LG315.
  • Casing made of PP.
AA

HIGH PRESSURE WITH ALUMINIUM BACKWARD IMPELLER

MANUFACTURING FEATURES:

  • Rolling steel sheet housing.
  • Fully welded housing.
  • High efficiency simple inlet backward curved impeller manufactured in cast aluminium.
  • Epoxy powder finishing coat.
  • Standard asynchronous squirrel-cage motor with IP-55 protection and class F insulation. Standard voltages 230/400V 50Hz motors up to 4kW and 400/690V 50Hz for higher powers.
  • Standard orientation: LG270

APPLICATIONS:

Designed for inline installation, they are suitable for:

  • Industrial applications, extraction or injection of air.
  • Cooling of machines and parts.
  • Clean air transport.
  • Exhaust after filters, separators and cyclones.
  • Pneumatic transport.
  • Maximum working temperature: carried air: 130ºC, ambient 60ºC.

UNDER REQUEST:

  • 60Hz fans and special voltages.
  • 2 speed motors.
  • Orientation: LG0, LG45, LG90, LG135, LG180. LG225, LG315.
AAVM

HIGH PRESSURE WITH BACKWARD IMPELLER

MANUFACTURING FEATURES:

  • Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average film thickness of 70 microns. Average heat resistence of coating is 180ºC with peaks of 200ºC.
  • Fully welded housing.
  • High efficiency simple inlet backward curved impeller made of Fe360 sheet statically and dynamically balanced. Impellers are painted with epoxy primer that resists temperatures up to 300ºC.
  • Standard asynchronous squirrel-cage motor with IP-55 protection and class F insulation. Manufactured with standard voltages: 230/400V 50Hz in three phase motors up to 4kW and 400/690V 50Hz for higher powers.
  • Standard orientation LG270.
  • It allows adjusting the orientation locally from models 350 to 630. Models sizes from 710 to 1000 size the orientation is fixed.

APPLICATIONS:

Designed for inline installation, they are suitable for:

  • Industrial applications, extraction or injection of air.
  • Cooling of machines and parts.
  • Clean and slightly dusty air transport.
  • Exhaust after filters, separators and cyclones.
  • Pneumatic transport.
  • Maximum working temperature: carried air: 130ºC, ambient: 60ºC.

UNDER REQUEST:

  • 60Hz fans and special voltages.
  • 2 speed motors.
  • Spark-proof fans with ATEX certified motor. 
  • Fan for air working temperatures up to 250ºC with R/R (cooling impeller).
  • Hot-dipped galvanised or stainless steel fans.
  • Orientation: RD0, RD45, RD90, RD135, RD180, RD225, RD270, RD315, LG0, LG45, LG90, LG135, LG180. LG225, LG315
     
AA P/R

HIGH PRESSURE WITH STRAIGHT IMPELLER 

MANUFACTURING FEATURES:

  • Rolling steel sheet housing.
  • Fully welded housing.
  • Straight blade impeller manufactured of rolled steel sheet and epoxy powder finishing coat.
  • Epoxy powder finishing coat.
  • Standard asynchronous squirrel-cage motor with IP-55 protection and class F insulation. Manufactured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase motors up to 4kW and 400/690V 50Hz for higher powers.
  • Standard orientation LG270

APPLICATIONS:

Designed for inline installation, they are suitable for:

  • Solid material transport (except for textile fibers).
  • Maximum working temperature: carried air: 130ºC, ambient: 60ºC.

UNDER REQUEST:

  • 60Hz fans and special voltages.
  • 2 speed motors.
  • Hot-dipped galvanized or stainless steel fan.
  • Orientation: LG0, LG45, LG90, LG135, LG180, LG225, LG315
     
HBX (ATEX)

AXIAL WALL ATEX FAN

MANUFACTURING FEATURES:

  • Plate axial fan, circular reinforced frame.
  • Motor-impeller assembly through modular system.
  • Cast aluminium impeller.
  • Corrosion-resistant powder coat epoxy resin..
  • ATEX standard asynchronous motor. Standard voltages 230V 50Hz for single phase motors, 230/400V 50Hz for three phase motors up to 4kW and 400/690V 50Hz for higher powers. II2G EEx_d IIC T5
  • IP55 Motor

APPLICATIONS:

Designed for wall or duct installation, they are suitable for:

  • Ventilation in indoor environments classified as ATEX zone 1.
  • Maximum working temperature: 50ºC.

UNDER REQUEST:

  • B Form' impeller (air sense from impeller to motor). 100% reversible impeller.
  • 60Hz fans and special voltages.
  • Bigger fan sizes.
  • With marking and certificate II 3G o II 3D. In Areas 1(gas), 2(gas) o 22(dust).
     
BOX HBX

ATEX INLINE SOUNDPROOF CABINET AXIAL

MANUFACTURING FEATURES

  • BOX: Soundproof galvanised steel boxwith thermo-acoustic elastomer insulation, M1 fire resistance. Easy motor access and fan maintenance through removable panels.
  • Internal fan coil round frame reinforced with intermediate rib and sparking aluminum ring. Modular design of the motor impeller assembly allows complete versatility in case of any change. Aluminum impeller variable pitch angle. Corrosion-resistant powder coat epoxy resin.
  • Asynchronous squirrel cage standard motor, IP-55 protection and rated class F insulation. Standard voltages 230V 50Hz for single phase motors, 230/400V 50 Hz for three phase motors up to 4 Kw and 400/690V 50 Hz for higher powers.
  • IP-55 motor.

APPLICATIONS

Designed for wall or duct installation, they are suitable for:

  • Air renewal in buildings and industries.
  • Smoke extraction (max 45-50ºC).
  • Ventilation in indoor environments classified as ATEX zone 1 with motor EEx_d IIC T5
  • Maximum working temperature: 50ºC
     

UNDER REQUEST

  • B form or 100% reversible impeller.
  • 60 Hz fans and special voltages.
  • Atex classification for other areas.
  • Bigger fan sizes
HMX

ATEX LONG CASED AXIAL

MANUFACTURING FEATURES:

  • Reinforced fan casing manufactured in rolling steel sheet.
  • Motor-impeller modular assembly for complete versatility.
  • Epoxy powder finishing coat.
    • Cast aluminum impeller with variable pitch angle.
    • Standard asynchronous ATEX motor. Manufactured with standard voltages: 230/400V 50Hz in three phase motors up to 4kW and 400/690V 50Hz for higher powers.
    • IP-55 motor.

APPLICATIONS

Designed for wall or duct installation, they are suitable for:

  • Air renewal in buildings and industries.
  • Smoke extraction (max 45-50ºC).
  • BOX HBX: General ventilation in enclosed environments classified as ATEX zone 1 with motor EEx_d IIC T5
  • Maximum working temperature: 50ºC

UNDER REQUEST

  • B-form or 100% reversible impeller.
  • 60Hz fans and special voltages.
  • Atex classification for other areas
  • Bigger fan sizes.

     

In compliance with the 94/9 CE

Notifier organism: IMQ (Nº 0051)
Identification number: 43EJ00001
 

MBX

CENTRIFUGAL MEDIUM PRESSURE ATEX FAN

MANUFACTURING FEATURES

  • Rolling steel sheet housing.
  • Completely joined or welded housing.
  • Simple inlet forward curved impeller made of aluminium sheet.
  • Epoxy powder finishing coat.
  • Inlet sparkproof ring made of copper or aluminium.
  • Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. ATEX certified EEx-d. Manufactured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase motors up to 4kW, and 400/690V 50Hz for higher powers.
  • Standard orientation: LG270.

APPLICATIONS

Designed for inline installation, they are suitable for:

  • General ventilation in closed environments classified as ATEX zone 2 or 22.
  • Maximum air working temperature from -20ºC to 80ºC.

UNDER REQUEST

  • 60Hz fans and special voltages.
  • Special ATEX executions.
  • Orientation: RD0, RD45, RD90, RD135, RD180, RD225, RD270, RD315, LG0, LG45, LG90, LG135, LG180. LG225, LG315.

In compliance with the 94/9/CE Directive. ATEX II2G built. Certified II3G with certified ATEX EEx-d II2G motor for areas 2 (gas) or 22 (dust).

MBPX

PLASTIC ATEX FAN WITH BACKWARD IMPELLER

MANUFACTURING FEATURES

  •  Antistatic PE-el antistatic housing.
  • Backward curved impeller in PP plastic.
  • Motor support made of rolled steel sheet with epoxy powder finishing coat.
  • Stainless steel nuts and bolts.
  • Standard asynchronous squirrel-cage motor, IP-55, class F insulation. Standard voltages 230/400V 50Hz. Equipped with II2G Eex-d motor.
  • Standard orientation: LG270.

APPLICATIONS

Designed for inline installation, they are suitable for:

  • Corrosive air transport.
  • Chemical and petrochemical industry.
  • Laboratories and gas cabinets.
  • General ventilation in closed environments classified as ATEX zone 2.
  • Maximum working temperature: 50ºC.
     

UNDER REQUEST

  • 60Hz fans and special voltages fans.
  • Stainless steel motor support.

In compliance with the 94/9/CE Directive. ATEX II2G built. Certified II3G with certified ATEX EEx-d II2G motor for areas 2 (gas) or 22 (dust).
 

MBPCX

PLASTIC ATEX FAN WITH FORWARD IMPELLER

MANUFACTURING FEATURES

  • Antistatic PE-el housing.
  • Forward curved impeller in PP plastic.
  • Motor support made of rolled steel sheet with epoxy powder finishing coat.
  • Stainless steel nuts and bolts.
  • Standard asynchronous squirrel-cage motor, IP-55, class F insulation. Standard voltages 230/400V 50Hz. Equipped with II2G Eex-d motors
  • Standard orientation: LG270.

APPLICATIONS

Designed for inline installation, they are suitable for:

  • Corrosive air transport.
  • Chemical and petrochemical industry.
  • Laboratories and gas cabinets.
  • General ventilation in closed environments classified as ATEX zone 2.
  • Maximum working temperature: 50ºC.

UNDER REQUEST

  • 60Hz fans and special voltages fans.
  • Stainless steel motor support.
  • Orientación: RD0, RD45, RD90, RD135, RD180, RD225, RD270, RD315, LG0, LG45, LG90, LG135, LG180. LG225, LG315.

In compliance with the 94/9/CE Directive. ATEX II2G built. Certified II3G with certified ATEX EEx-d II2G motor for areas 2 (gas) or 22 (dust).

Evaporative Cooler

Features:
The new high performance cooling pad (HPP) is designed in particular for the evaporative coolers with high air face velocity and large volume air output. With the optimized design on paper corrugation, the HPP presents remarkable lower pressure drop against the high air face velocity and outstanding evaporative efficiency as well. 

Grouped and Centralized Control with Maximum 9 Groups of 20 Units Both Wireless and Wired Remote Control Available Accurate Humidity and Temperature Control (Wireless Remote Control Models)
24 Hours Timer On/Off
Auto-Clean Available to Prolong the Service Life of Cooling Pad
1-99 Hours Draining Interval Adjustable
Self-Diagnosis and Error Code Display

Target Applications
Automobile Assemble and Accessories Factories
Plastic Injection and Rubber Factories
Textile Mills
Hardware Processing Factories
Maintenance Workshops of High-Speed Trains
 

Wind Turbine Ventilator

SPECIFICATIONS

  • 14” & 16”  Diameter  Wind Turbine Ventilator with Duo Fan
  • Bright Aluminium Vanes – Anodizing Standard Special Grade Japan Inst. of Standard (JIS) H - 4000 A 1050P, H24
  • steel shaft, Teflon impregnated Stainless-Steel Ball Bearing
  • Square to Round Reducing Adaptor & Flange Base for Mounting Ventilator

 

Neck Size                :    14” & 16”      
Base opening          :    20”x 20”  &  22” x 22”     
Flange Base            :    Customized to the roof angel     
Height of Adaptor    :    24”     

  • High speed limiting devise
  • Weight of Ventilator - 1.4 kg  & 1.5 Kg
  • Warranty - Three Years against manufacturing defects