The UV lamp produces Ozone O3. This is a very powerful oxidizing agent. It oxidizes the many organic compounds and acts as an deodorizing agent and is effective for odour control. It also sterilizes the air.
Units are designed for easy mounting to existing or new exhaust ducts. The ballast housing and other components are kept out of the air stream. Lamps can be easily replaced via the ballast housing. Multiple units can be connected and linked to a separate control unit for interlocking operations with the exhaust fan. The control unit is an optional item.
Features & Benefits
- Compact Design
- Quick and Easy Installation
- Easy Maintenance
- Reduces Duct Cleaning
- Operations Indicator LEDs
- Interlock Control Panel
- No Pressure Drop
- Fits All Exhaust Ducts
- No Noise F
Carbon filtering is a method of filtering that uses a bed of activated carbon to remove contaminants and impurities, using chemical adsorption. Each particle/granule of carbon provides a large surface area/pore structure, allowing contaminants the maximum possible exposure to the active sites within the filter media.
Units are designed for easy integration to existing or new exhaust ducts. The ballasts and other components are kept out of the airstream. Lamps are installed in a rack and are can be easily replaced by opening the ballast compartment. The whole rack can be removed for lamp change or individual lamps can be removed one by one.
COS-5-90 and COS-10-90 units should be installed as near to the cooking hoods as possible, or as far as possible from the discharge outlet, so as to give the longest possible contact time with the cooking exhaust. For optimum performance, the contact time for air treatment in the duct should be approximately 0.1 to 0.2 seconds or longer if possible. Charcoal filters may be installed at the last stage to mop up residue ozone if preferred
Designed specifically for the removal of smoke and grease particles from the air stream of commercial kitchen exhaust systems and for the elimination of odour. The filters inside the module guarantee a constant efficiency of filtration and, thanks to a high ability of separation and accumulation of oil, allow a remarkable energy saving and low drop pressure. The module is produced in galvanized iron and painted with epoxy dusts colour RAL 7035.